Oh yeah...you'll have some more uuuummmmmpppphhh! :)
- Bernd
-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of ronald bruce
taylor,jr
Sent: Sunday, October 26, 2003 8:18 PM
To: dakota-truck@dakota-truck.net
Subject: Re: DML: RE: 4:56:1 Gear installation Question
I'm just swapping the gears in both of the diffs from 3.92:1 to a set of
4.56:1.......need a little more uuuuuummmmmmmpppphh off the line!
Ron-
01'Dakota Sport 3.9 4WD
Street,Strip,and Show!
----- Original Message -----
From: "Bernd D. Ratsch" <bernd@texas.net>
To: <dakota-truck@dakota-truck.net>
Sent: Sunday, October 26, 2003 5:20 PM
Subject: RE: DML: RE: 4:56:1 Gear installation Question
>
>
> As long as the gear/tire ratio is close to something from the
> factory...it should be fine.
>
> - Bernd
>
> -----Original Message-----
> From: owner-dakota-truck@bent.twistedbits.net
> [mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of andy
> levy
> Sent: Sunday, October 26, 2003 4:00 PM
> To: dakota-truck-moderator@bent.twistedbits.net
> Subject: Re: DML: RE: 4:56:1 Gear installation Question
>
>
>
> Bernd D. Ratsch wrote:
>
> > If the overall tire size isn't something the factory offered (or is
> > out of the factory range), they yes...programming is required.
>
> We're talking about changing only the *gears*, not the tires.
>
> --
> -andy
>
> http://home.twcny.rr.com/andylevy/dakota - andy-dml@levyclan.us
> --------------------------------------------
> "Whatever Adam does, do the opposite and you'll be fine"
> -Bob Tom
> --------------------------------------------
>
>
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:47:04 EST