Re: RE: 4:56:1 Gear installation Question

From: ronald bruce taylor,jr (taylor9565@msn.com)
Date: Sun Oct 26 2003 - 21:55:17 EST


Well the 275-65-VR17 Nitto's and the stock 3:92's feel more like 3:49's!

Which isn't a lot of leverage to move a 4300lb truck!......

I figure with the 42RE's overdrive 4th gear being 0.69:1, the 456's should
feel more like a 3.00 to a 3.30 in OD and the around town driving should be
a little more snappy!

It should also help the 60' times some and lower my ET's too!

Ron-
01'Dakota Sport 3.9 4WD
Street,Strip,and Show!

----- Original Message -----
From: "Bernd D. Ratsch" <bernd@texas.net>
To: <dakota-truck@dakota-truck.net>
Sent: Sunday, October 26, 2003 9:24 PM
Subject: RE: DML: RE: 4:56:1 Gear installation Question

>
> Oh yeah...you'll have some more uuuummmmmpppphhh! :)
>
> - Bernd
>
> -----Original Message-----
> From: owner-dakota-truck@bent.twistedbits.net
> [mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of ronald bruce
> taylor,jr
> Sent: Sunday, October 26, 2003 8:18 PM
> To: dakota-truck@dakota-truck.net
> Subject: Re: DML: RE: 4:56:1 Gear installation Question
>
>
>
> I'm just swapping the gears in both of the diffs from 3.92:1 to a set of
> 4.56:1.......need a little more uuuuuummmmmmmpppphh off the line!
>
> Ron-
> 01'Dakota Sport 3.9 4WD
> Street,Strip,and Show!
>
>
> ----- Original Message -----
> From: "Bernd D. Ratsch" <bernd@texas.net>
> To: <dakota-truck@dakota-truck.net>
> Sent: Sunday, October 26, 2003 5:20 PM
> Subject: RE: DML: RE: 4:56:1 Gear installation Question
>
>
> >
> >
> > As long as the gear/tire ratio is close to something from the
> > factory...it should be fine.
> >
> > - Bernd
> >
> > -----Original Message-----
> > From: owner-dakota-truck@bent.twistedbits.net
> > [mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of andy
> > levy
> > Sent: Sunday, October 26, 2003 4:00 PM
> > To: dakota-truck-moderator@bent.twistedbits.net
> > Subject: Re: DML: RE: 4:56:1 Gear installation Question
> >
> >
> >
> > Bernd D. Ratsch wrote:
> >
> > > If the overall tire size isn't something the factory offered (or is
> > > out of the factory range), they yes...programming is required.
> >
> > We're talking about changing only the *gears*, not the tires.
> >
> > --
> > -andy
> >
> > http://home.twcny.rr.com/andylevy/dakota - andy-dml@levyclan.us
> > --------------------------------------------
> > "Whatever Adam does, do the opposite and you'll be fine"
> > -Bob Tom
> > --------------------------------------------
> >
> >
>
>



This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:47:04 EST