>
> alignment is nicely spec'd (got the sheet)
> everything seems nice and tight again (cross camber, total toe and left
> toe were all pretty bad)
> they straightened out my cross-member pretty well (tweaked by high
> centering at the BBQ, for those who don't know)
> leveled out the truck (right side was an inch lower - +1/2" overall, so
> it appears very level front-to-back now)
>
> I need to pull my front mudflaps - their molded shape sticks out into
> the tire mid-turn (poor ASCII drawing below illustrates mudflap shape)
> _
> t\ |f
> i | |l
> r | / a
> e/ | p
Are you talking about wheel wells? If you are, my tires rubbed a little on
the wheel well plastic. I took a heat gun, heat them up a bit and reshaped
it to fit the wheel. Careful not to melt them ;-)
-- *------------------------------Y2KOTA------------------------------* Don Mallett Y2K QC 4.7L Auto SLT+ 4x2 http://www.y2kota.us *---------------Dodge, Different by a country mile!!!---------------*
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:47:08 EST