RE: OBD II Codes - P0320, P1296, P1391

From: Rick Barnes (rascal@scrtc.com)
Date: Fri Nov 28 2003 - 08:37:34 EST

Maybe you soaked the mass air flow sensor? Guessing ...I need another
turkey sandwich while I think about it.

Rascal

-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of
crit.bennett@us.army.mil
Sent: Thursday, November 27, 2003 11:41 PM
To: dakota-truck@dakota-truck.net
Subject: DML: OBD II Codes - P0320, P1296, P1391

Soon after washing my '01 4.7L 5-spd truck, it started to develop a
misfire of sorts and now no longer cranks. The odo spits out P0320,
P1296, P1391 which led me to think that I had a bad or unplugged
(high-pressure degreasing) crank position sensor. I've removed the plug
and cleaned the contacts on both the MAP and CKP and my problem remains.
Any ideas? Does the oil level lie below the CKP such that I can just
change it if need be? I'm gonna check the wiring for continuity
tomorrow but forsee a new sensor in my future.

Crit Bennett
SPC, US ARMY (Ret)
3109 Lundin Dr., Apt. 1
Manhattan, KS 66503

This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:47:10 EST