<david.clement@verizon.net> wrote in message
news:brng92$og$1@bent.twistedbits.net...
> >
> > jack vehicle and support by frame with front wheels about 4 - 5 inches
off
> > the ground. take a LONG pry bar (i use a 4 footer) and move the
suspension
> > (wheel) up and down (loading/unloading) while having someone look at the
> > joints. If any sort of extraneous movement is observed, then it's time
for
> > new ones.
>
> Actually you would want to jack the truck up by the lower control arm so
that
> the spring/torsion bar is not loading the suspension.
>
> Dave Clement
> 99 SLT+ CC 4x4
I forgot to add that part, I do it both ways to be more thorough. Thanks
David.
-- - Josh Lowered 2000 Dakota CC 3.9L www.geocities.com/lenny187/dakota.html
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:47:12 EST