Just out of curiosity, where would I get a Rollmaster from? I've seen a few on
the internet and they look to be very good, but it looks like it'd have to come
from Australia.
Just curious.
Court
In article <195.266d06b8.2d70826e@aol.com>, B1LLYW@aol.com writes:
>
>
>
>
>
>
> In a message dated 2/27/2004 1:58:38 AM Eastern Standard Time,
> courtneysmith@excite.com writes:
>
>
> > Cloyes and Comp Cams are the two that I am particularly
> > interested in, and Cloyes has been mentioned in many of the archives, but
> > I'm
> > just curious if the Comp Cams (#'s 2103 or 3103) would work with the
> > tensioner
> > or not (also if they would even work with this engine) and same thing with
> > the
> > Cloyes?
> >
> > Any information on this would be extremely appreciated.
> >
>
> Cloyes. BAD. I've seen several disintegrate for no apparent reason.
> Rollmaster is great if you can find it. My next choice is the Comp Cams
3103. The
> tensioner will work either.
>
> Bill White - KRC Performance
>
> http://www.bionicdodge.com
>
> '95 Dakota CC 4x2 - 408 is done, truck isn't
> '03 Ram 1500 QC 4x4 Hemi Off-Road
>
This archive was generated by hypermail 2b29 : Mon Mar 01 2004 - 00:34:04 EST