Re: 3.9 Engine blocks ?

From: ronald bruce taylor,jr (taylor9565@msn.com)
Date: Mon Mar 29 2004 - 20:32:13 EST


The block has been checked for cracks, I asked what it needed done to make
it useable and all it basically needed was the mains align bore honed,
punched .020-.030, and decked .010 to square it up.

It has the mounting bosses cast in it that are similar to the ones on my
3.9, I'm just curious as to what makes the difference between the Pre-Magnum
and Magnum cylinder casing castings?

I'm going back later this week to check it further and see if I can find the
casting Date on it..........

Ron-
01'Dakota Sport 3.9 4WD
www.scsilverdak.1colony.com

----- Original Message -----
From: "greg conner" <dodgeboy93@hotmail.com>
To: <dakota-truck@dakota-truck.net>
Sent: Monday, March 29, 2004 8:03 PM
Subject: RE: DML: 3.9 Engine blocks ?

>
> Well all the 3.9's used a roller cam. Look on the side at the casting
> date.
> Your gonna want a mag block (92 and up) I dont beleive the older blocks
> have the bosses on them to use the motor mounts in your block.
>
> I'd check it over (maganflux) for cracks and such. Also check in and
> around
> the headbolt holes closely for cracks, thats a common spot on a high
> millage
> engine.
>
>
>
> Greg Conner
> 1996 RC
> 3.9 hybrid
>
>
>
>
>
> >From: "ronald bruce taylor,jr" <taylor9565@msn.com>
> >Reply-To: dakota-truck@dakota-truck.net
> >To: "Dakota Mailing List" <dakota-truck@dakota-truck.net>
> >Subject: DML: 3.9 Engine blocks ?
> >Date: Mon, 29 Mar 2004 19:13:50 -0500
> >
> >
> >I've run a across a Bare 3.9 engine block at a Pretty good price of
> >$40.00,
> >it needs to be fully machined and prepped for use.
> >
> >A local machine shop has it in the spare engine block core supply, and
> >they
> >offered it to me, since they don't do much in the way of V6
> >engines.
> >
> >I looked it over and it is a Roller Cam block, and at this price I find
> >it
> >cheap enough to buy for a possible candidate to build a Supercharger
> >specific shortblock.
> >
> >I just wonder if there are any differences over the 3.9 production run
> >in how these blocks were cast.
> >
> >Ron-
> >01'Dakota Sport 3.9 4WD
> >www.scsilverdak.1colony.com
>
> _________________________________________________________________
> Is your PC infected? Get a FREE online computer virus scan from McAfeeŽ
> Security. http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963
>
>



This archive was generated by hypermail 2b29 : Sat Feb 16 2008 - 21:39:22 EST