""David Henry"" <DML@HenryWeb.net> wrote in message
>
> 1st trans ordered was somehow for a 4x2. This one didn't even make it out
> of the shipping box as it didn't even look close. Trans #2 came and
looked
> close enough to fool the casual observer. It bolts up to the engine fine,
> but the tail housing is an inch too long, and the mounting bolts on the
> crossmember don't line up. Tag on the replacement indicates that the core
> is from a '98.
What's wrong with the trans you have now? If nothing's wrong with the
output shaft or tailhousing, then you could swap them onto the new
transmission. That could be a relatively painless way to solve your issue.
-- - Josh Lowered 2000 Dakota CC 3.9L www.geocities.com/lenny187/dakota.html www.omg-stfu.com
This archive was generated by hypermail 2b29 : Sat May 01 2004 - 12:00:16 EDT