Thanks Ray, I am going to call them tomorrow.
Bernd, thanks and please let me know if you find
anything.
--- RayB <bpracing@worldnet.att.net> wrote:
>
> One solution for the front bolt pattern is to send
> your rotors (or a pair of
> new ones if you need them) over to Moser and have
> them plug and redrill them
> for the 5 on 4.5 bolt pattern. Costs about $75 and
> you'll have them back
> within the week.
>
http://www.moserengineering.com/moser_interior/shopservices.htm
>
>
> RayB
> http://www.dragtruk.com/ENTRIES/20KM1FD2KWBP.html
>
>
>
> > -----Original Message-----
> > From: owner-dakota-truck@bent.twistedbits.net
> > [mailto:owner-dakota-truck@bent.twistedbits.net]On
> Behalf Of Bernd D.
> > Ratsch
> > Sent: Wednesday, April 14, 2004 6:46 AM
> > To: dakota-truck@dakota-truck.net
> > Subject: RE: DML: RE: Bolt Circle Change
> >
> >
> >
> > That's going to be tough. Since the hubs/bearings
> are a one-piece
> > design, I don't think that any of the other 5-bolt
> versions will fit
> > properly. I'll check at work as I have access to
> quite a few different
> > hub models.
> >
> > - Bernd
> >
> > -----Original Message-----
> > From: owner-dakota-truck@bent.twistedbits.net
> > [mailto:owner-dakota-truck@bent.twistedbits.net]
> On Behalf Of Wayne
> > Sent: Tuesday, April 13, 2004 8:59 PM
> > To: dakota-truck@dakota-truck.net
> > Subject: Re: DML: RE: Bolt Circle Change
> >
> >
> >
> > Actually I am working on a Dana 60 for the back,
> it is
> > the front I am hoping to find an easy swap for.
> The
> > truck is 2WD.
> >
>
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
This archive was generated by hypermail 2b29 : Sat May 01 2004 - 12:00:17 EDT