Bernd D. Ratsch wrote:
> Was thinking with the M1, TB, and the K&N airhat (for some reason). Be
> safe - go 3" max.
>
> (or...just put the bolt through the hood and use a large bumber washer
> and nut. That way, the hood is locked down for high-speed passes!) ;)
>
> - Bernd
>
> -----Original Message-----
> From: owner-dakota-truck@bent.twistedbits.net
> [mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of
> jndneff@texas.net
> Sent: Monday, April 19, 2004 2:48 PM
> To: dakota-truck-moderator@bent.twistedbits.net
> Subject: Re: DML: Re: RE: Gen 3 Air hat space?
>
>
>
>
>>You're looking at "maybe" 1 - 1.5" without the hood liner.
>
>
> In the spirit of not crushing a new hat or punching a dimple into the
> hood, I bought a chunk of clay and will see how much it compresses with
> the hood shut tonight. If there is enough room for a 4" hat plus the
> retaining nut, I've found a source for an injection molded high flow hat
> for $58.00 shipped!
>
> John
Ok this thread is getting frightening - - watch your bearings people -
lets not tread into dangerous territory with this one.
-- -------------------------------------------------------------- ***** Countdown to 2004 DML BBQ (91) Days Left! *****Terrible Tom -- AIM & Yahoo Name: SilverEightynine http://members.aol.com/silvereightynine/
This archive was generated by hypermail 2b29 : Sat May 01 2004 - 12:00:17 EDT