RE: Valve cover vent

From: John Neff (jndneff@texas.net)
Date: Wed Apr 28 2004 - 22:44:09 EDT


After looking at the truck again, I realized the port I thought was unused,
isn't. The brake booster attaches to that port. Time to keep looking for a
seperate port to install into the air hat.

John

>I wasn't able to pick up a barbed port for my new air hat today and
>remembered that there is an unused 3/8" port on drivers side of my M1
>manifold. Does anyone know if this would be a suitable place to hook up the
>valve cover vent or will there be too much vacuum resulting in the engine
>sucking oil from the valve cover. My gut tells me it will be fine since the
>PCV line attaches in the same location on the passenger side plus there are
>baffles inside the valve cover. But, I thought it wise to ask before I cut
>the line and tried it out.



This archive was generated by hypermail 2b29 : Sat May 01 2004 - 12:00:18 EDT