"Jay & Dana" <jay&dana@telus.net> wrote:
: I've been thinking about relocating my IAT sensor also for quite some time
: now but am wondering as to the location on the intake tube. On my 97,318 I
: have the K&N FIPK, should this sensor be placed in the middle of the tube,
: closer to the cone filter, or closer to the air hat section, or is it really
: important?
The closer to the filter you can get the sensor, the cooler the air
should be (which is usually what you want - the coldest air reading
possible). However, as long as its in the intake tube somewhere, it
probably doesn't really matter - the differences from one end of the
tube to the other will likely be minimal.
--
-Jon-
.-- Jon Steiger ---- jon@dakota-truck.net or jon@jonsteiger.com --.
| 1970 Barracuda - 1990 Dakota 'vert - 1992 Ram 4x4 - 1996 Dakota |
| 1996 Intruder 1400 - 1996 Kolb FireFly - 2001 Ram QC 3500 CTD |
`------------------------------------ http://www.jonsteiger.com --'
This archive was generated by hypermail 2b29 : Sun Aug 01 2004 - 00:46:15 EDT