At 11:33 PM 8/12/04, you wrote:
>If you're trying to get the pushrods that come with the MP 1.7 kit (as in
>the better ones)...they're only available with the kit. Those are basically
>stock replacements. - Bernd
Thanks. I did not know that the P5007506 pushrods were basically
stock replacements. I need something beefier for drag racing (probably
like the ones with the MP 1.7 kit) but am somewhat limited to what I can
get up here in a timely and cost-wise fashion.
I've been using pushrods that come with the MP aluminum 1.6 kit
and need to replace them with something for a cam with 0.520 / 0.544.
Would you happen to know if the MP P5249757 Magnum Adjustable
Hydraulic pushrods would work with this cam and the MP aluminum
1.6 roller rockers?
I also read something somewhere that seemed to IMPLY that pushrods
used with MP aluminum roller rockers have to be 3/8". Do you happen
to know if there's any truth to that.
Thanks
Bob
This archive was generated by hypermail 2b29 : Wed Sep 01 2004 - 00:53:41 EDT