Re: Shackles and hangers

From: Michael Maskalans (dml@tepidcola.com)
Date: Thu Aug 26 2004 - 00:22:30 EDT

Next message: Mike Meyerhoff: "Re: Dml: Gen II clear taillights..."
Previous message: Michael Maskalans: "Re: Re: Driving Manners Are Nonexistent"
In reply to: bob: "Re: Shackles and hangers"
Next in thread: Pindell, Timothy: "RE: Shackles and hangers"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

On Aug 25, 2004, at 22:41, bob wrote:

>
> Center punch the rivit head, drill 3/8" deep with a 1/8....then a
> 1/4 .....then a 5/16 drill.....
>
> The rivit head will then come right off with one wack with a chisel
> and hammer

of course it will. getting them out of the frame is another matter
altogether.

--
Mike Maskalans            <http://mike.tepidcola.com/dodge/>
'84 RamCharger Daily Driver       '98 Dakota under the knife
mobile.612.618.4652    home.585.935.7129

Next message: Mike Meyerhoff: "Re: Dml: Gen II clear taillights..."
Previous message: Michael Maskalans: "Re: Re: Driving Manners Are Nonexistent"
In reply to: bob: "Re: Shackles and hangers"
Next in thread: Pindell, Timothy: "RE: Shackles and hangers"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Wed Sep 01 2004 - 00:53:42 EDT