Center punch the rivit head, drill 3/8" deep with a 1/8....then a 1/4
.....then a 5/16 drill.....
The rivit head will then come right off with one wack with a chisel and
hammer
Bob
http://www.obsessivecompulsivedakota.com
Michael Maskalans wrote:
>
>
> On Aug 25, 2004, at 19:29, WiLieR[SS] wrote:
>
>> Simply grind the head off the rivets and then use something like an
>> air hammer, or a regular hammer and a good punch, to drive the rivet
>> back through the frame.
>
>
> Good luck beating them out. I've had no luck whatsoever, and will
> probably resort to drilling them out.
> --
> Mike Maskalans <http://mike.tepidcola.com/dodge/>
> '84 RamCharger Daily Driver '98 Dakota under the knife
> mobile.612.618.4652 home.585.935.7129
>
>
This archive was generated by hypermail 2b29 : Wed Sep 01 2004 - 00:53:42 EDT