Assuming the 4x4 brake setup is the same as a 4x2:
You'll need pads, 7mm hex to remove caliper pins, a large screw driver, and
a 4-6" throat c-clamp.
1) jack and support truck, remove wheel
2) using 7mm hex, remove 2 caliper pins
3) using screwdriver, pry caliper up and off caliper mount
4) using screwdriver, pry pads off caliper
5) push piston back using c-clamp
reverse procedure to reinstall
repeat on the other side
For a newbie, expect an hour. An experienced guy can do it in 1/2 hour or
so.
TonyC
-----Original Message-----
From: ffastje <ffastje@cox.net>
To: DML <dakota-truck@dakota-truck.net>
Date: Tuesday, August 31, 2004 4:59 PM
Subject: DML: front brake instructions?
>
>I was wondering if anyone had a write up for the front brakes on the Dakota
>on there web page. TIA
>
>
>ffastje@cox.net 1999 Dakota CC 3.9 auto 4X4
>jet performance thermostat http://www.geocities.com/ffastje/
>
>
>---
>Outgoing mail is certified Virus Free.
>Checked by AVG anti-virus system (http://www.grisoft.com).
>Version: 6.0.745 / Virus Database: 497 - Release Date: 8/27/2004
>
>
>
This archive was generated by hypermail 2b29 : Wed Sep 01 2004 - 00:53:42 EDT