Thanks Tony
----- Original Message -----
From: "Tony Cellana" <acellan1@tampabay.rr.com>
To: <dakota-truck@dakota-truck.net>
Sent: Tuesday, August 31, 2004 4:15 PM
Subject: DML: Re: front brake instructions?
>
> Assuming the 4x4 brake setup is the same as a 4x2:
>
> You'll need pads, 7mm hex to remove caliper pins, a large screw driver,
> and
> a 4-6" throat c-clamp.
>
> 1) jack and support truck, remove wheel
> 2) using 7mm hex, remove 2 caliper pins
> 3) using screwdriver, pry caliper up and off caliper mount
> 4) using screwdriver, pry pads off caliper
> 5) push piston back using c-clamp
>
> reverse procedure to reinstall
>
> repeat on the other side
>
> For a newbie, expect an hour. An experienced guy can do it in 1/2 hour or
> so.
>
> TonyC
>
>
> -----Original Message-----
> From: ffastje <ffastje@cox.net>
> To: DML <dakota-truck@dakota-truck.net>
> Date: Tuesday, August 31, 2004 4:59 PM
> Subject: DML: front brake instructions?
>
>
>>
>>I was wondering if anyone had a write up for the front brakes on the
>>Dakota
>>on there web page. TIA
>>
>>
>>ffastje@cox.net 1999 Dakota CC 3.9 auto 4X4
>>jet performance thermostat http://www.geocities.com/ffastje/
>>
>>
>>---
>>Outgoing mail is certified Virus Free.
>>Checked by AVG anti-virus system (http://www.grisoft.com).
>>Version: 6.0.745 / Virus Database: 497 - Release Date: 8/27/2004
>>
>>
>>
>
>
--- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.745 / Virus Database: 497 - Release Date: 8/27/2004
This archive was generated by hypermail 2b29 : Wed Sep 01 2004 - 00:53:42 EDT