Re: front brake instructions?

From: Jason A Banta (jason.banta@louisville.edu)
Date: Wed Sep 01 2004 - 09:17:10 EDT


What about the clip? Does this need to be reinstalled, and if so it was
a pain in the A@@ for me.

Jason

>>> acellan1@tampabay.rr.com 8/31/2004 5:15:45 PM >>>

Assuming the 4x4 brake setup is the same as a 4x2:

You'll need pads, 7mm hex to remove caliper pins, a large screw driver,
and
a 4-6" throat c-clamp.

1) jack and support truck, remove wheel
2) using 7mm hex, remove 2 caliper pins
3) using screwdriver, pry caliper up and off caliper mount
4) using screwdriver, pry pads off caliper
5) push piston back using c-clamp

reverse procedure to reinstall

repeat on the other side

For a newbie, expect an hour. An experienced guy can do it in 1/2 hour
or
so.

TonyC

-----Original Message-----
From: ffastje <ffastje@cox.net>
To: DML <dakota-truck@dakota-truck.net>
Date: Tuesday, August 31, 2004 4:59 PM
Subject: DML: front brake instructions?

>
>I was wondering if anyone had a write up for the front brakes on the
Dakota
>on there web page. TIA
>
>
>ffastje@cox.net 1999 Dakota CC 3.9 auto 4X4
>jet performance thermostat http://www.geocities.com/ffastje/
>
>
>---
>Outgoing mail is certified Virus Free.
>Checked by AVG anti-virus system (http://www.grisoft.com).
>Version: 6.0.745 / Virus Database: 497 - Release Date: 8/27/2004
>
>
>



This archive was generated by hypermail 2b29 : Fri Oct 01 2004 - 11:38:58 EDT