Not really required unless you plan on changing out the cam in the future
(make sure the springs are rated for the specs on the cam though). However,
not a bad idea if on a higher mileage engine (50K+ miles).
- Bernd
-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of Gabriel A.
Couriel
Sent: Saturday, September 25, 2004 8:03 PM
To: DML
Subject: DML: 1.7RR question
when you upgrade from the stock rockers, to 1.7RR's, do you need to replace
the stock valvesprings with the R/T springs? if not, is it recommended (i
would imagine so)? i was just wondering.
Gabriel Couriel
This archive was generated by hypermail 2b29 : Fri Oct 01 2004 - 11:38:59 EDT