""Eric Hufstedler"" <mopar@ehuffy.com> wrote in message
>
> For my 99 2WD, the FSM says to use the spring compressor tool to be able
> to release the lower all joint from the knuckle.
>
> Since i'll have the truck up on stands at the frame, wouldn't i be able to
> just use a floor jack to push the lower control arm up enough?
>
> I realize i could make a tool like in the manual, but am hoping the tool
> is just a convenience.
>
> thanks,
> eric
When I did my joints, I supported the truck by the frame with jackstands,
then used a floor jack to support the lower arms and keep the springs
compressed. It was really no big deal at all.
-- - Josh Lowered 2000 Dakota CC 3.9L Above Statement Not True ^^^^^ www.omg-stfu.com
This archive was generated by hypermail 2b29 : Sat Jan 01 2005 - 11:48:09 EST