> Depending on the model year of your Dak, it is also possible to get
> the codes for free, without buying anything, using the "key on/off"
> method. See http://www.dakota-truck.net/codes for details.
>From that page:
-----------
How to get the codes on a 1998-1999 Dakota:
Depress the trip reset and trip/odometer switches, and, while holding
them, turn the ignition to ON/RUN, and wait about 5 seconds. This
sends the car through a short self-test sequence that lights all
segments of the odometer and shift selector read-out (where
applicable). It will then display the stored error codes.
-----------
I believe that this only gives codes for the gage cluster. Has anyone
ever retrieved a "normal" error code using this method?
Thanks,
eric
This archive was generated by hypermail 2b29 : Sun May 01 2005 - 01:40:55 EDT