That's only for the cluster. Key-ON 3-times doesn't work for '98 models
either.
- Bernd
-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of Eric
Hufstedler
Sent: Thursday, April 14, 2005 11:10 AM
To: dakota-truck@dakota-truck.net
Subject: Re: DML: Dakota Diagnostics
> Depending on the model year of your Dak, it is also possible to get
> the codes for free, without buying anything, using the "key on/off"
> method. See http://www.dakota-truck.net/codes for details.
>From that page:
-----------
How to get the codes on a 1998-1999 Dakota:
Depress the trip reset and trip/odometer switches, and, while holding
them, turn the ignition to ON/RUN, and wait about 5 seconds. This sends the
car through a short self-test sequence that lights all segments of the
odometer and shift selector read-out (where applicable). It will then
display the stored error codes.
-----------
I believe that this only gives codes for the gage cluster. Has anyone ever
retrieved a "normal" error code using this method?
Thanks,
eric
This archive was generated by hypermail 2b29 : Sun May 01 2005 - 01:40:55 EDT