On Wed, 4 May 2005 08:31:06 -0500
"Bernd D. Ratsch" <fasstdak@hotmail.com> wrote:
> One other item I forgot to mention. I've seen the factory pumps
> break at the impeller. Pump turns with the serpentine belt, but
> no water moves.
Wow, that would be hard to diagnose.
> Yes, "normally" they would leak at either the seal(s) or weep-
> hole...but I've even seen a new pump with a loose impeller.
I had it replaced (along with the hoses). It wobbles but
still all together. I guess the
seal is just squishy enough suck up the slop.
thanks for the help,
eric
This archive was generated by hypermail 2b29 : Wed Jun 01 2005 - 05:44:45 EDT