Mine drops to 12.2v at idle if I don't watch it. That's with the A/C,
Headlights, and onboard PC system on (ASP underdrive pulley).
- bernd
-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of Ray Block
Sent: Sunday, June 12, 2005 9:27 PM
To: dakota-truck@dakota-truck.net
Subject: DML: RE: Anyone with a scanner/reader system
> -----Original Message-----
> From: Bob Tom
>
> Anyone using a scanner or reader system that is able to pick up the
> charging system volts?
>
> At idle, mine shows 13.5 volts which seems low to me.
>
> Thanks.
> Bob
You think that's low? At idle, in gear, at 750 rpm, mine reads 13.30 volts.
It increases to 13.60 at higher rpms. Be aware that I have underdrive
pulleys.
-Ray
This archive was generated by hypermail 2b29 : Fri Jul 01 2005 - 09:48:06 EDT