The one thing that seemed to add the most change for cheap on my Jeep
with the 4.0L I6 was to bore out the throttle body. I had a local shop
mill it out for $30. I would assume that the 2.5 TB could be improved
with a wider TB bore as well.
-Marc-
-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of
dean_ocque@yahoo.com
Sent: Friday, June 17, 2005 2:36 PM
To: dakota-truck-moderator@bent.twistedbits.net
Subject: Re: DML: RE: Throttle body spacer
When you run a four banger, any increase is better, a two horse
power
increase is noticable on a 120 horse engine. So, what is something that
will
actually work.
Dean
> It won't screw up the PCM at all - however, it won't make any
noticeable
> difference either. Save the money on something that will actually
work.
This archive was generated by hypermail 2b29 : Fri Jul 01 2005 - 09:48:06 EDT