asuming distribuor is in the factory location, hasn't been removed and
reinstalled in another spot.
>From: "Rick Barnes" <barnesrv@comcast.net>
>>
>Yes, the 1 on the cap is for cylinder #1, then just follow it with the
>firing order from there...do you know what I mean by that?
>
>Rascal
>
>-----Original Message-----
>From: owner-dakota-truck@bent.twistedbits.net
>[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of Joseph Orsini
>>
>
>OK guys,
>
> got all the ignition stuff pulled off. I want to make sure of
>something
>before I put it back together. My crappy repair manual shows a picture of
>the firing order and the cap but it doesn't line up the same as the cap
>installed in the truck and I want to make sure I have the right wires on
>the
>right terminals. On the top of the cap is stamped a number 1 right above a
>terminal, is this the terminal for the #1 plug? I want to assume it is but
>you know what happens then...also there is a plastic vent cap in the middle
>of two terminals, this looks like the two plugs that connect above the vent
>are the 8 and 4? Does that question even make sense? I just want to
>double
>check everything before I move on to something else.
>
>
This archive was generated by hypermail 2b29 : Fri Jul 01 2005 - 09:48:06 EDT