Gotta love it though Tom.
Rascal
-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of Terrible Tom
Sent: Monday, January 02, 2006 6:32 AM
To: dakota-truck-moderator@bent.twistedbits.net
Subject: Re: DML: My schrader valve measurements. (was: 0.305-32 UNS
thread... )
Dan Kramarsky wrote:
> Jon,
>
> I thought I would take a few moments and measure my schrader valve and
this is what I
> measured with my set of calipers:
>
>
> Major thread dia: 0.438"
> Minor thread dia: 0.382" (could be off by 0.002" on this one)
>
> Pitch: 20 TPI
>
>
> This would make it very close to 7/16-20 UNF thread. So is my valve a
different size
> than yours?
>
> -dan
>
>
hehehee! Only on the DML!... will you find such an indepth heartfelt
detailed conversation about schrader valves :)
-- --------------------------------------------------------------------------- Rocks are for skipping... I'm all about the mud 75 Honda CL360, 89 Dakota, 89 Dakota 4x4, 95 Dakota 4x4, 01 Ram 4x4 http://members.aol.com/silvereightynine/ AIM & Yahoo: SilverEightynine
This archive was generated by hypermail 2b29 : Wed Feb 01 2006 - 20:27:15 EST