I bought a kit from JC Whitney is exactly what you are looking for. A 3"
mandrel bent cat back system for under $200 that exits in the stock
location. Check out there exhaust.
Mike K
94 SLT,CC,239,2wd,auto
95 Sport,RC,360,5-speed
>From: Terrible Tom <SilverEightynine@aol.com>
>Reply-To: dakota-truck@dakota-truck.net
>To: dakota-truck-moderator@bent.twistedbits.net
>Subject: Re: DML: WANTED: 3" over-axle tail pipe, mandel-bent
>Date: Thu, 12 Jan 2006 13:39:59 -0600
>
>
>Dan Kramarsky wrote:
>>Help:
>>
>>Does anyone have or knows where to buy a pre-made 3" over-axle,
>>mandrel-bent, tail pipe
>>for the GenII Club Cabs? ( 131" wheel base truck )
>>
>>This would be a "Side Exit" pipe. Exiting in the stock location. (just
>>behind the
>>right-side rear wheel)
>>
>>I have a new muffler I got from somebody local that was selling it. It's
>>a DynoMax 3"
>>in/ 3" out.
>>
>
>I'd prolly hit an exhaust shop and have them bend up a pipe for it. Might
>not be the cheapest method - but prolly would be the most simple.
>
>--
>---------------------------------------------------------------------------
>Rocks are for skipping... I'm all about the mud
>75 Honda CL360, 89 Dakota, 89 Dakota 4x4, 95 Dakota 4x4, 01 Ram 4x4
>http://members.aol.com/silvereightynine/
>AIM & Yahoo: SilverEightynine
>
This archive was generated by hypermail 2b29 : Wed Feb 01 2006 - 20:27:15 EST