Re: RE: O.D. on a stock exhaust (2000 Dakota Quad Cab 4x4) outlet

From: Mallett, Donald B (Donald.Mallett@BNSF.com)
Date: Fri Jun 02 2006 - 04:55:03 EDT


Subject: Re: DML: RE: O.D. on a stock exhaust (2000 Dakota Quad Cab 4x4) outlet

On 5/31/06, jon@dakota-truck.net <jon@dakota-truck.net> wrote:
>
> Don <y2kota@y2kota.us> wrote:
>
> : I like the front of the rear tire pipe. Would like to be-able to that
> : on my QC. I was told its to tight of a fit to do it.
>
>
> Anything's possible with enough time and/or money... ;-) Its been
> a while since I've been under a QC, but I am reasonably confident that
> it could be done without too much hassle. You might need to shift the
> cat and/or an O2 sensor or two upstream a little bit, but there should
> be enough room there to dump out in front of the tire.

>Only thing to watch out for there is on a QC, dumping the exhaust in
>front of the tire will put the tip very close to the rear door.
>Exhaust can find its way into the cabin easier there, and passengers
>could get their legs dangerously close to the exhaust when
>entering/exiting.

Hey that's good thinking, I haven't thought about that. Most likely I'll end up going with singal pipe or dual out at the stock location be hind the passenger side rear wheel. Thanks!

- --
*------------------------------Y2KOTA------------------------------*
Don Mallett
Y2K QC 4.7L Auto SLT+ 4x2
http://www.y2kota.us
*-----I'm not late! It's that the rest of the world is early!!-----*

.
.
.------------------------------------------------------------------.
| Make your plans NOW to attend the National DML Meet in Colorado! |
| Date: July 15-23, 2006 - More info: http://meet.dakota-truck.net |
`------------------------------------------------------------------'



This archive was generated by hypermail 2b29 : Sat Jul 01 2006 - 11:43:30 EDT