What Jamie said! Applies to all Mopars with this behavior. Not very
expensive as I recall and easy to change yourself.
Ray
> -----Original Message-----
> From: Jamie Calder
>
> Sounds like the old resistor block problem. On Gen I and II's (maybe
> later
> years too), there's a resistor held in by 2 bolts on the passenger side
> firewall under the hood. It's about 2" x 3/4" and to the extreme left
> side
> (passenger). Pull the 5 or 6 wire plug off, the 2 bolts and it should be
> pretty obvious if the resistor is bad.
> Hope this helps.
> James
>
> -----Original Message-----
> From: Ted Wiegandt
>
> Just in time for 100 degree heat, my vent fan only works on high. I am
> happy that at least high works. All the other levels give me nothing. I
> was driving along with the AC on medium and all of a sudden it just quit.
> Any ideas on this? Are these vacuum switches? Could is just be a split
> hose?
>
.
.
.--------------------------------------------------------------------.
| The National DML Meet is in progress! http://meet.dakota-truck.net |
`--------------------------------------------------------------------'
This archive was generated by hypermail 2b29 : Tue Aug 01 2006 - 10:33:41 EDT