Bob, that was it! Took me all of about 10 minutes. Thank you very much
for the help!!
I was a little reluctant to pull that cover without knowing if the
flasher unit was even behind it since the Dealer mounted the alarm to the
dang thing.
Thanks again for the help!!
Tim
----- Original Message -----
From: "DAKSY" <rsmith13@nycap.rr.com>
To: <dakota-truck@dakota-truck.net>; <tkoth@cox.net>
Sent: Sunday, January 21, 2007 12:36 PM
Subject: Re: DML Help With Turn Signal Flasher
> Hey, Tim...
>
> <snip> Can anyone help me out here please? I'm in digest mode, so if
> anyone has a
> quick pointer please<snip>
>
> You have to drop the steering column opening cover to access the flasher
> unit as follows:
>
> 1. Disconnect the negative cable on the battery - so you don't trigger the
> air bag.
>
> 2. Remove three screws retaining the cover...IIRC they're #2 Phillips...
>
> 3. Gently pry the upper edge of the cover away from the steering column to
> relaease the retainer clips...Might have to use a small flat bar...
>
> 4. Reach in along the outboard side of the column & you should be able to
> feel the relay at the forward side of the fuse block...
>
> 5. It the relay panel should snap off the fise panel by pushing it towards
> the driver door.
>
> 6. Pull the relay panel towards the steering column & you can remove the
> flasher unit ...
>
> 7. Reverse the steps for install...
>
> "Ping" me on AIM if you need a quicker response!
>
> HTH,
>
> Bob (DAKSY) Smith
> DAKSY2K on AIM
> 2K SY Dakota Sport +
> V-6 4 x 4 5 speed
> 2K05 HD 883C YP
>
> http://home.nycap.rr.com/daksy/
> Averill Park, NY
>
This archive was generated by hypermail 2b29 : Mon Feb 18 2008 - 18:47:20 EST