Those look like a good idea but a drill defiantly won't fit in there.
-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of Rick Barnes
Sent: Wednesday, March 07, 2007 9:59 PM
To: dakota-truck@dakota-truck.net
Subject: DML: RE: Paper Gasket
3M makes a gasket remover that might help.
http://www.eastwoodco.com/jump.jsp?itemID=2333&itemType=PRODUCT
Rascal
-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of Jamie Calder
Sent: Wednesday, March 07, 2007 8:51 PM
To: dakota-truck@dakota-truck.net
Subject: DML: Paper Gasket
Besides a scraper what's the easiest way to remove a baked on paper gasket?
There's hardly any room between the sideways sitting engine's water pump
base and the inner fender. Getting a scraper in there is extremely time
consuming and the material is stuck on like epoxy. Anything available that
can be sprayed on there that will just dissolve the stuff? Wishful
thinking, right?
This archive was generated by hypermail 2b29 : Sun Apr 01 2007 - 03:13:50 EDT