That's fast Ed
Jim, 91 Dak
----- Original Message -----
From: <Olznut@aol.com>
To: <aol@dakota-truck.net>
Sent: Monday, April 16, 2007 1:05 AM
Subject: Re: DML: Blow it out yer exhaust...
>
>
>
>
>
>
> In a message dated 4/15/2007 10:47:10 P.M. Pacific Daylight Time,
> SilverEightynine@aol.com writes:
>
> So anyone else feel like adding anything to that? I've done zero
> exhaust experimentation on my own so I'm hoping to get feedback from you
> guys out there who have more experience with exhaust
>
> --
>
>
>
>
> I'll add my $.02 worth. If you keep the stock size pipe, you'll have a bit
> more bottom end, which is better for around town driving. Going bigger
> will get
> you more on top, but lower end will suffer a bit. Learned this on my old
> '01
> QC 4x4 Dak. My suggestion? Depends on your driving. Just around town, not
> a
> lot of hot rodding, the 2.5" will work fine. Just get a good high flowing
> muffler for it. Here's something I don't get, all the aftermarket
> companies are
> making exh kits for my '06 Ram Cummins. 4" kits are a few hundred bucks.
> What
> folks DON'T know is that the diesels COME WITH 4" exhaust all the way
> back.
> I just added a muffler and left it at that, saving $$ for future mods. It
> cost me only $685 to knock more than 2 seconds off my 1/4 mile time, if I
> can
> only get this think to hook up, it will be awesome! 2.7 60' time and
> still just
> about 100 mph in 14.9 sec 1/4 mile tells me a lot more is on tap.....
>
> Ed "Olznut" Halterman '06 Ram Quad Cab Patriot Blue 2500 Cummins diesel
> 14.9
> at 98mph! '66 Olds 442, "Project Olds", Intense Blue, $4000 paint job
> will
> be finished by next month!
>
>
>
>
> ************************************** See what's free at
> http://www.aol.com.
>
This archive was generated by hypermail 2b29 : Mon May 07 2007 - 19:04:35 EDT