Jamie Calder wrote:
> I did the pump in my '96 a few months ago. I removed the rear bumper but
> left the main brackets bolted to the frame and the 2 side angled brackets
> left on the bumper, only 6 bolts for that. After the bed bolts were removed
> (and hoses, tail light wires, rear wheels etc.) I was able to easily scoot
> the bed back. Only needed to move a couple feet. I got a pic of it if your
> curious.
Did you have any problems with the brake drums? Did you have to take
the splash shields off or anything? Or were you able to get clearance
without moving it that far back? I wouldn't mind seeing that picture if
you have it handy.
That sounds like it might be easier for me to pull off than constructing
a scaffolding out of old lumber to support it. Since I don't have any
old lumber around and don't feel like buying any just for that.
Thanks.
-- Jason Bleazard http://drazaelb.blogspot.com Burlington, Ontario his: '95 Dakota Sport 4x4, 3.9 V6, 5spd, Reg. Cab, white hers: '01 Dakota Sport 4x4, 4.7 V8, Auto, Quad Cab, black
This archive was generated by hypermail 2b29 : Mon May 07 2007 - 19:04:36 EDT