Just change the sensor.
- Bernd
-----Original Message-----
From: Francis Fastje [mailto:ffastje@cox.net]
Sent: Monday, June 18, 2007 4:10 PM
To: dakota-truck@dakota-truck.net
Subject: Re: DML: RE: RWAL-VSS
Bernd D. Ratsch wrote:
> The RWAL sensor is on the top of the rear diff. The updated sensor also
> comes with a new harness connector (if applicable to your year).
>
> - Bernd
>
> -----Original Message-----
> From: Francis Fastje [mailto:ffastje@cox.net]
> Sent: Monday, June 18, 2007 5:14 AM
> To: dakota-truck@dakota-truck.net
> Subject: DML: RWAL-VSS
>
>
> RWAL-VSS located in the top of the third member.I have the Haynes manual
and
> i cant seem to find what that is. TIA
>
>
>
>
>
>
Well I found the RWAL sensor Cleaned the contacts with contact cleaner
cleared the code.
I drove about half a block the check engine lite came on when the RPM's
got to like 3600
& it did shift but it was not right . Will replacing the sensor cure
this or should i just take it to the shop?
This archive was generated by hypermail 2b29 : Sun Jul 01 2007 - 21:47:16 EDT