RE: 89 Dak need help

From: Rick Barnes (rascal@scrtc.com)
Date: Thu Aug 09 2007 - 13:56:22 EDT


Its still likely that resistor

Rascal

-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of
carychip@hotmail.com
Sent: Thursday, August 09, 2007 12:13 PM
To: dakota-truck-moderator@bent.twistedbits.net
Subject: DML: 89 Dak need help

Help me please, its hot out there. My 89 DAK 3.9L needs a little help. The
heat/AC blower stopped working on high setting this morning. The lower
switch
settings still work. I looked into the archives here and it seems that
usually
the problem is with the lower settings not working and the high working. I
checked the fuse. I hope its the blower resistor block because that sounds
easy to fix, but if the high setting doesn't work and the lower settings do,
wouldn't that indicate the prob is somewhere else?
Thanks for any help.



This archive was generated by hypermail 2b29 : Sat Sep 01 2007 - 00:05:36 EDT