That's because it's a pressed on pulley. The holes are there for the pegs
on the tool made for holding it.
brian cropp
-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of Zito, James A
(GE Infra, Energy)
Sent: Tuesday, September 04, 2007 8:49 PM
To: Dakota list (E-mail)
Subject: RE: DML: FSM and water pump removal
Problem: I don't have any water pump pulley bolts. Apparently there are
supposed to be
4 of them. But all I have on the face of water pump pulley is 4 empty
holes. ( huh? )
Yep. 4 holes.
>>>>>>>>>>>>
Dan,
Either put some bolts or even snug fitting screwdrivers in them holes and
pry against them.....
Jim
well versed in improvising
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.485 / Virus Database: 269.13.3/986 - Release Date: 9/3/2007
9:31 AM
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.485 / Virus Database: 269.13.3/986 - Release Date: 9/3/2007
9:31 AM
This archive was generated by hypermail 2b29 : Tue Oct 02 2007 - 15:23:18 EDT