RE: Tensioner and idler bearings

From: hskr@cox.net
Date: Tue Nov 06 2007 - 09:30:04 EST


Actually, the tensioner pulley is a 15mm bolt. The idler pulley is 14mm. At least that's the way it is/was on both my R/Ts.

---- rll <charger69rt@cox.net> wrote:

> The tensioner retainer is a 14mm bolt takes 15 seconds to unbolt....if just
> the pulley is replaced...to replace the whole assembly it is three bolts
> and the coil to deal with...
>
>
> that pulley that is held on with that 14 mm bolt....the pulley should
> still be the serviceable piece.
>
> rob/ferts/phx
>
>
>
>
>
>
>
>



This archive was generated by hypermail 2b29 : Tue Dec 04 2007 - 17:27:36 EST