Brian W. writes: >> I just did a clutch job on my 95 and
now haven't got the motor to do more than cough a
couple of times. Check the ignition & fuel, right? The coil
seems to be working fine; I get spark indicated with a
timing lite on both coil and plug leads. I hear the fuel
pump when I turn on the ignition. I've poured gas down
the throttle body and still get nothing when I crank it. If
spark is OK why won't it do anything with gas poured
down its throat? If I hear the pump it should be getting
fuel. I replaced the coil wire shortly before the clutch job.
Truck would not start. After that it seemed fine. Truck has
been sitting a month or so due to work and holiday trips
but now its time to go. What am I missing? <<
Crank position sensor.. I pinched the leads on mine
when replacing the tranny(auto) and had a "no crank"
situation. It is located on passenger side upper of
Bellhousing near & behind the head..
"One of the hardest things in life to learn is
which bridge to cross and which bridge to burn"
Azie
This archive was generated by hypermail 2b29 : Fri Feb 01 2008 - 01:11:51 EST