JoeB327@comcast.net ("Joe B.") wrote in
news:Xns9AA5C8ACA10E1JoeB327comcastnet@72.45.149.62:
> Hi guys,
> I have a 1999 QC 4x4. I want to replace the rear sway bar bushings
> because they are worn and I am getting the "clunk" sound over bumps. I
> thought I read here in the DML that the prefered replacement bushings
> were from NAPA, blue colored ones. I tried finding the post again but
> couldn't :-( Anyways, according to NAPA, they only carry two sizes of
> bushings, 16mm and 18mm. I measured my sway bar in multiple places and
> it measures only 15mm. I priced the bushings at Dodge and they are $15
> EACH!! My question is if there would be too much slop with the 16mm
> bushing on the 15mm bar? Any other suggestions or opinions are
> welcome. Thanks
> Joe B.
>
Anyone???
This archive was generated by hypermail 2b29 : Mon Jun 02 2008 - 00:18:53 EDT