OK. I found where the lines go. There is a black line that runs out
through the firewall along with the coolant lines (heater core) to the
main vaccuum line under the cowl. If you follow this back to the heater
core housing, there is what looks like a " U " shaped tab that has a
screw throug it. The black line I was looking for connects to the back of
this, essentially creating one long black line.
I guess I was lucky that I didn't rip anything when pulling the core
housing out from behind the dash.
Disconnect the vacuum hoses at the middle connector!!! :-)
-- Chris Reck Bloomington, IL>> '99 Dakota Sport + CC 4x4 V6 (Deep Amethyst) >> "It's not the meat, it's how you apply the rub"
chris_blm@comcast.net (Chris) wrote in news:hqd9at$9t6$2 @bent.twistedbits.net:
> > I have actually 2 black lines. One that exits out where the heater > (coolant) cores with a large connector. I assume this goes to the T- > Fiting hanging on the firewall. > > The other is taped together with the Blue/Yellow lines that go to the > Floor/Defrost actuator. I can't see anything on the heater core where > this would go. >
This archive was generated by hypermail 2b29 : Sat May 01 2010 - 00:11:43 EDT