Have not had that problem with mine. And I've got two years of driving on
them. Might be more the pad selection than the rotors.
brian cropp
> -----Original Message-----
> From: owner-dakota-truck@bent.twistedbits.net [mailto:owner-dakota-
> truck@bent.twistedbits.net] On Behalf Of Barry Oliver
> Sent: Wednesday, September 22, 2010 12:24 AM
> To: dakota-truck@dakota-truck.net
> Subject: Re: DML: RE: $#@# Brakes continued
>
>
> Brian wrote:
> > The anti-rust coating is a black zinc coating applied to a lot of
> > performance brakes. Especially EBC rotors. I have the same
> slotted/dimpled
> > rotors and the coating lasts and works. Over two years on my rotors and
> the
> > coating is still holding up where the pads haven't worn it off. As for
> the
> > bedding procedure, it's an industry standard thing. I do it on all my
> > vehicles and it does help.
> >
> > brian cropp
> >
>
> My EBC's had an odd problem, all of my dimples and slots filled up with
> brake dust slag to where I could feel them on the brake pedal. A couple
> taps with a center punch or a screwdriver and mallet and the stuff fell
> out, leaving the dimple/slot looking good as new, but it was a PITA to
> hit every one [hence the center punch].
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 9.0.851 / Virus Database: 271.1.1/3151 - Release Date: 09/21/10
> 17:15:00
This archive was generated by hypermail 2b29 : Mon Nov 01 2010 - 10:47:31 EDT