On Sep 25, 2011 5:22 PM, "Chris Reck" <chris.bulk92@gmail.com> wrote:
>
>
> I had forgotten you had one, so I found a new OEM dipstick and tube for
> $20 from a Mopar parts site.
>
> Since the Dipstick goes into the pan, I should be able to take a tube or
> bolt of the same size and from the inside of the pan, gently pound it up
> and out.
>
> Shouldn't be any tricks on dropping the pan, and I have a set of gaskets.
>
> Should I replace / check anything since the pan is dropped?
Depends on your motor and goals. You could replace the oil pump, main
bearings, crank scraper, windage tray......
- Josh "ilovespendingotherpeoplesmoney" Battles
This archive was generated by hypermail 2b29 : Sat Oct 01 2011 - 11:35:32 EDT