I just bought a spray on solution that I haven't tried yet, but I'm told if I get overspray on glass, use a razor blade widget... it's from O'Rielly...still too hot in Texas to apply
Sent from my iPhone
On Sep 28, 2011, at 1:01 PM, Tom Coulter <metalshop@optonline.net> wrote:
>
> This question is different than most I've seen on the DML site - they're usually mechanical/electrical.
>
> It involves the headliner in the cab. After 14 years, my old '97 Dakota Sport is showing aging signs in the cab. The felt headliner is peeling back a few inches from the underling pad. Each tine I get in, I do the ritual: calmly pet the liner onto the pad to get it to "stick" all along the windshield, which it does for that errand. Next time I get in, I have to do the samo samo.
>
> I actually purchased a set of thumb tacks, thinking I might simply pin the liner up by placing tacks every 3 inches or so. But then I thought this approach was best left to the Low Riders.
>
> Methinks it would be difficult to try to apply glue between the liner and the pad, and I'd probably get glue on the windshield anyhow.
>
> Has anyone else had this issue? What's the best solution? Staple gun? <smile>
>
>
This archive was generated by hypermail 2b29 : Sat Oct 01 2011 - 11:35:32 EDT