> Does anyone know what size speakers will fit in the stocl locations?
The quick answer is none.
The Chrysler systems are all designed by Mitsubishi and use an odd size and
bolt pattern. You can 'fit' a 5x7 in the rear and a 5.5" in the front, but
it isn't without some minor fabrication. The rears are not too bad if you
select your driver carefully. The big problem there is the speaker is
supported by the plastic trim, so there isn't much room to work with.
In the front, having the pannel opened to 6" is fairly easy and a lot of
drivers will fit this opening. Be sure to select the driver before cutting
the hole as all baskets are slightly different.
Christopher Siano | "How do you control this thing?"
CSiano@Banyan.com | "Who Cares, Go FASTER!"
| -Suicide
----------------------------------------------------------
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:07:20 EDT