To: dakota@csclub0.cs.fredonia.edu@INTERNET; mjacob@VNET.IBM.COM@INTERNET
From: Clement_D on Thu, Jun 20, 1996 1:41 PM
Subject: RE: Oil Pressure Problems
From: mjacob@VNET.IBM.COM@INTERNET on Thu, Jun 20, 1996 1:23 PM
>-My 89 Daytona keeps getting an oil build up inside the connector socket so
I
>-suspect that it is leaking also, I just have not got around to replacing
it.
>-The
>-Dakota sensor has not given me any problems. I wonder if the Daytona
>-problem is related to the sensor hanging off the end of the junction block
>-and is being effected by vibration?
>-Dave Clement
>Dave, My Dakota sensor and my 92 5.2V8 have no problems. Only when I
>put the sensor on the Daytona do I have a problems. Could it be because
>on my V6 and V8 are mounted vertical and the Daytona is horizontal? It
>could be vibration like you said.
Jake,
Both of my Daytona's the sensor is close to vertical, the horizontal port on
the end of the junction block is where I connect the mechanical gauge. I
would vote for vibration over orientation as the culprit. The 2.2 is quite a
shaker.
Dave Clement
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:07:24 EDT