-My 89 Daytona keeps getting an oil build up inside the connector socket so I
-suspect that it is leaking also, I just have not got around to replacing it.
-The
-Dakota sensor has not given me any problems. I wonder if the Daytona
-problem is related to the sensor hanging off the end of the junction block
-and is being effected by vibration?
-Dave Clement
Dave, My Dakota sensor and my 92 5.2V8 have no problems. Only when I
put the sensor on the Daytona do I have a problems. Could it be because
on my V6 and V8 are mounted vertical and the Daytona is horizontal? It
could be vibration like you said.
Jake
Mark (Jake) Jacobson, STAD Rochester, Circuit Technology
MASK Design Specialist
Internet = mjacob@vnet.ibm.com
HDC/040-2, IBM Rochester, MN 55901-7829
(507) 253-5378, (T/L) 8-553-5378
================================================================
"Life goes by pretty fast, If you don't stop and look around,
you might just miss it!"
-Ferris Bueller
================================================================
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:07:24 EDT