No such thing as a stupid question.
You have a few options.
1) Leave it disconnected. Never liked the idea of pumpin' that nasty
air into my intake charge.
2) Replace the stock nippled breather with an open type breather.
3) The Edelbrock p/n 1208 air cleaner has a short nipple that extends
off the base. A piece of tubing cut to length and you're in business.
4) For other open element air cleaners that may not have the same
provision as above PAW has an adapter that you mount in the air
cleaner base after drilling a small hole. This gives you a spot to
attach the breather hose to. I think it's like $1.50 or sumthin' like
that.
Hope this helps.
Sean
'97 318/5spd/3.55SG/Edelbrock-K&N FIPK clone
MSD 6A ignition awaiting install
sean_p_meldrum@auto.ittind.com
______________________________ Reply Separator
_________________________________
This might be a stupid question but what do you do with the line that
goes from the breather cap on the valve cover to the front of the air cleaner
if you put an open element air cleaner on?
the Magnum V6?
TIA
Gregg
92 CC V6
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:07:37 EDT