Re: Rear Axle Ratio 3.21 vs 3.55

From: Robert P. Agnew (ragnew@islandnet.com)
Date: Sat May 10 1997 - 16:50:58 EDT


At 01:50 PM 5/10/97 -0700, you wrote:
>I'm about to order a '97 4WD Dakota with the V6 and manual 5-speed
>which comes standard with the 3.21 rear end but if you get the payload
>package (an additional 500 lbs.) they put in the 3.55 rear end. I'm
>looking for the maximum ecconomy so suspect that the 3.21 would be the
>best choice. Then when carrying a heavy use a set of Helwig overload
>springs. Any thoughts appreciated.
>--
> >--------------------------------------------<
> >Ray <Piziali@slip.net> PGP Key Available<
> >--------------------------------------------<
>~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> "Whoever controls the volume of money in any country is absolute
> master of all industry and commerce."
> -- President James A. Garfield
>~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>
>
Some good advice ... forget the 6 and order the V8 with the 3.55.

Rob Agnew
ragnew@islandnet.com

Victoria, British Columbia
Canada

 



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:07:40 EDT