Mopar Performance ... Single-Board-Engine-Controller
Information for everyone; Concerning the '97 rear swaybar
Axle Bracket Assembly: 52039094AB bracket 2
52039442AA strap 2
6504815AA bolt 2
52039453AA spacer 2
Stabilizer Bar 52039422 bar 1
Bar to Axle Bracket 52088125 bushing 2
52087865 bracket 2
Link to Frame 52087863 link assembly 2
52038968 bracket 2
Misc. 6503726 screw 4
6502696 nut 4
6503571 screw/washer 4
52038713 stud plate 2
Hope this helps some of you folks that want to add a rear swaybar, this is
a direct bolt on system. No drilling, no welding, brake lines are already
designed to clear the axle clamps. Please verify all part numbers, as the
newer Parts Manual supersedes the one I am quoting from.
===================='97 Dakota SLT+=====================
L. John Morris<ljohn@alltel.net>
!!!!! ... your local *HEMI* owner ...!!!!!
White/Driftwood/CC/4x4/5.2L/5spd/3.92SG/FIPK clone
soon to have "Edelbrock" cat-back
==================== Reply Separator ====================
----------
> From: DRD892@aol.com
> To: dakota@ait.fredonia.edu
> Subject: Magnum Performance Hotline?
> Date: Thursday, May 22, 1997 5:57 PM
>
> Mr. Sean Meldrum,
>
> Thank you for the information on the computer upgrade for my '97 Dakota.
> Just what does MPSBEC stand for. I assume it is the new computer.
> I was not aware there is a Magnum Performance Hotline.
(snip)
>
> Here is some information that may help someone in the List.
>
(snip)
>
> The Rear Stabilzer Bar is clamped to the rear axle in two places (if I
> remember
(snip)
>
> I do not know the layout for the Rear Sway Bar on the 4X4.
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:07:41 EDT